OIL SEAL PA2C
The PA2C profile is a radial seal composed of a single metal case with a rubber coating, a PTFE sealing lip and an anti-dust lip. The PTFE sealing lip offers high wear resistance.
CHARACTERISTICS
- Excellent chemical resistance.
- Wide temperature range.
- Low friction.
- Excellent wear resistance.
- Excellent dielectric properties.
- Good aging resistance.
- Good mechanical resistance.
With an anti-dust lip to prevent dirt.
See our gInstallation guide for oil seals to perform a correct installation of the seal.
| ø | ºC | bar | m/s |
|---|---|---|---|
|
15-300 mm |
-50ºC + 250ºC |
≤ 10 bar |
≤ 30 m/s |
MATERIALS
Lip
Virgin PTFE
Glass filled PTFE
Carbon filled PTFE
Graphite filled PTFE
Metal casing
AISI 1060-90 · AISI 304 · AISI 316
Elastomer
NBR 70-75 Shore A
FKM 75-80 Shore A
VMQ 70-75 Shore A
ACM 70-75 Shore A
EPDM 70-75 Shore A
HNBR 70-75 Shore A
TOLERANCES FOR THE OUTSIDE DIAMETER OF THE OIL SEAL
| Housing diameter | Metal cage | Elastomeric coating | Housing with grooves |
|---|---|---|---|
| ≤50.0 | +0.10 / +0.20 | +0.15 / +0.30 | +0.20 / +0.40 |
| <50.0 ≤80.0 | +0.13 / +0.23 | +0.20 / +0.35 | +0.25 / +0.45 |
| <80.0 ≤120.0 | +0.15 / +0.25 | +0.20 / +0.35 | +0.25 / +0.45 |
| <120.0 ≤180.0 | +0.18 / +0.28 | +0.25 / +0.45 | +0.30 / +0.55 |
| <180.0 ≤300.0 | +0.20 / +0.30 | +0.25 / +0.45 | +0.30 / +0.55 |
| <300.0≤500.0 | +0.23 / +0.35 | +0.30 / +0.55 | +0.35 / +0.65 |
| <500.0 ≤630.0 | +0.23 / +0.35 | +0.35 / +0.65 | +0.40 / +0.75 |
TOLERANCE FOR THE INNER DIAMETER OF THE SEAL
The inner diameter of the sealing lip is always smaller than the shaft diameter. Depending on the shaft size, the sealing lip diameter is generally between 0.8 and 3.5 mm smaller than the shaft diameter.
Can we help you ?
Our team will help you to find the best solution.
EN 
ES 
FR