Yellow measuring cone for inch-size O-rings

Description

Manufactured from polyurethane and designed to identify O-rings in accordance with the Anglo-American BS / AS568 series. It measures inside diameters from 7.65 to 142.24 mm. To use it, first measure the O-ring cross-section with a vernier caliper, then slide the O-ring onto the cone until the corresponding number can be read. The table included in the catalogue supplied with the product converts this number into the inside diameter measurement.

Technical data

DATOS TÉCNICOS

NO.	Inside diameter (mm)	Cross section (mm)
011	7.65	1.78
012	9.25	1.78
013	10.82	1.78
014	12.42	1.78
015	14.00	1.78
016	15.60	1.78
017	17.17	1.78
018	18.77	1.78
019	20.35	1.78
020	21.95	1.78
021	23.52	1.78
022	25.12	1.78
023	26.70	1.78
024	28.30	1.78
025	29.87	1.78
026	31.47	1.78
027	33.05	1.78
028	34.65	1.78
029	37.82	1.78
030	41.00	1.78
031	44.17	1.78
032	47.35	1.78
033	50.52	1.78
034	53.70	1.78
035	56.87	1.78
036	60.05	1.78
037	63.22	1.78
038	66.40	1.78
039	69.57	1.78
040	72.75	1.78
041	75.92	1.78
042	82.27	1.78
043	88.62	1.78
044	94.97	1.78
045	101.32	1.78
046	107.67	1.78
047	114.02	1.78
048	120.37	1.78
049	126.72	1.78
050	133.07	1.78
110	9.19	2.62
111	10.77	2.62
112	12.37	2.62
113	13.94	2.62
114	15.54	2.62
115	17.12	2.62
116	18.72	2.62
117	20.30	2.62
118	21.89	2.62
119	23.47	2.62
120	25.07	2.62
121	26.64	2.62
122	28.24	2.62
123	29.82	2.62
124	31.42	2.62
125	32.99	2.62
126	34.59	2.62
127	36.17	2.62
128	37.77	2.62
129	39.34	2.62
130	40.94	2.62
131	42.52	2.62
132	44.12	2.62
133	45.69	2.62
134	47.29	2.62
135	48.90	2.62
136	50.47	2.62
137	52.07	2.62
138	53.64	2.62
139	55.25	2.62
140	56.82	2.62
141	58.42	2.62
142	59.99	2.62
143	61.60	2.62
144	63.17	2.62
145	64.77	2.62
146	66.34	2.62
147	67.95	2.62
148	69.52	2.62
149	71.12	2.62
150	72.69	2.62
151	75.87	2.62
152	82.22	2.62
153	88.57	2.62
154	94.92	2.62
155	101.27	2.62
156	107.62	2.62
157	113.97	2.62
158	120.32	2.62
159	126.67	2.62
160	133.02	2.62
161	139.37	2.62
210	18.64	3.53
211	20.22	3.53
212	21.82	3.53
213	23.39	3.53
214	24.99	3.53
215	26.57	3.53
216	28.17	3.53
217	29.74	3.53
218	31.34	3.53
219	32.92	3.53
220	34.52	3.53
221	36.09	3.53
222	37.69	3.53
223	40.87	3.53
224	44.04	3.53
225	47.22	3.53
226	50.39	3.53
227	53.57	3.53
228	56.74	3.53
229	59.92	3.53
230	63.09	3.53
231	66.27	3.53
232	69.44	3.53
233	72.62	3.53
234	75.79	3.53
235	78.97	3.53
236	82.14	3.53
237	85.32	3.53
238	88.49	3.53
239	91.67	3.53
240	94.84	3.53
241	98.02	3.53
242	101.19	3.53
243	104.37	3.53
244	107.54	3.53
245	110.72	3.53
246	113.89	3.53
247	117.07	3.53
248	120.24	3.53
249	123.42	3.53
250	126.59	3.53
251	129.77	3.53
252	132.94	3.53
253	136.12	3.53
254	139.29	3.53
255	142.27	3.53
325	37.47	5.33
326	40.64	5.33
327	43.82	5.33
328	46.99	5.33
329	50.17	5.33
330	53.34	5.33
331	56.52	5.33
332	59.69	5.33
333	62.87	5.33
334	66.04	5.33
335	69.22	5.33
336	72.39	5.33
337	75.57	5.33
338	78.74	5.33
339	81.92	5.33
340	85.09	5.33
341	88.27	5.33
342	91.44	5.33
343	94.62	5.33
344	97.79	5.33
345	100.97	5.33
346	104.14	5.33
347	107.32	5.33
348	110.49	5.33
349	113.67	5.33
350	116.84	5.33
351	120.02	5.33
352	123.19	5.33
353	126.37	5.33
354	129.54	5.33
355	132.72	5.33
356	135.89	5.33
357	139.07	5.33
358	142.24	5.33
425	113.67	6.99
426	116.84	6.99
427	120.02	6.99
428	123.19	6.99
429	126.37	6.99
430	129.54	6.99
431	132.72	6.99
432	135.89	6.99
433	139.07	6.99
434	142.24	6.99

User manual for the O-Ring installation cone

The measuring cone makes it possible to determine the dimensions of O-rings to the Anglo-American standard (BS – AS568) quickly and reliably, from Ø7.65 mm up to Ø142.24 mm inside diameter.

Identifying the cross section

Identificación del diámetro interior

Can we help you?

Our team will help you find the best solution and choose the optimal profile and material for your application.