SEAL DG41B

The DG41B profile is a double spring and external seal, special for bicycle shock absorbers. It has an exterior groove to facilitate assembly.

CHARACTERISTICS

Very good resistance to high and low temperatures.
Good resistance to high pressure.
Works well under high surface speed.
Resistant to buffer fluid.
Special for bicycle fork.

See our Installation guide for oil seals to perform a correct installation of the seal.

ø	ºC	bar	m/s
15-100 mm	-30ºC / 100ºC	≤ 6.5 bar	≤ 1,5 m/s

MATERIALS

Elastomer

NBR 80-90 Shore A

HNBR 80-90 Shore A

XNBR 80-90 Shore A

Metal casing

AISI 1060-90 - AISI 304 - AISI 316

Spring

AISI 1060-90 - AISI 302 - AISI 304 - AISI 316

TOLERANCES FOR THE OUTSIDE DIAMETER OF THE OIL SEAL

Housing diameter	Metal cage	Elastomeric coating	Housing with grooves
≤50.0	+0.10 / +0.20	+0.15 / +0.30	+0.20 / +0.40
<50.0 ≤80.0	+0.13 / +0.23	+0.20 / +0.35	+0.25 / +0.45
<80.0 ≤120.0	+0.15 / +0.25	+0.20 / +0.35	+0.25 / +0.45
<120.0 ≤180.0	+0.18 / +0.28	+0.25 / +0.45	+0.30 / +0.55
<180.0 ≤300.0	+0.20 / +0.30	+0.25 / +0.45	+0.30 / +0.55
<300.0≤500.0	+0.23 / +0.35	+0.30 / +0.55	+0.35 / +0.65
<500.0 ≤630.0	+0.23 / +0.35	+0.35 / +0.65	+0.40 / +0.75

TOLERANCE FOR THE INNER DIAMETER OF THE SEAL

The inner diameter of the sealing lip is always smaller than the shaft diameter. Depending on the shaft size, the sealing lip diameter is generally between 0.8 and 3.5 mm smaller than the shaft diameter.

Can we help you?

Our team will help you find the best solution and choose the optimal profile and material for your application.