Applicator CD

The CD applicator is intended for applications that require an offset geometry or a specific angle to work in hard-to-reach areas. It is designed to facilitate ring installation when the assembly position prevents the use of a straight applicator or when the pushing axis must be offset from the main working line.
The main difference of this model is its offset configuration, which improves access to the installation point, maintains good control during installation and reduces the risk of incorrect ring positioning. It is suitable for industrial applications requiring precision, repeatability and adaptation to the available space.
VENTAJAS
MATERIALES
Disponible en NBR y POM. El anillo de estanqueidad se fabrica en NBR reforzado con tejido, que aumenta la resistencia mecánica y la capacidad de soportar la presión sin extruirse, y los anillos de guía y apoyo en POM, un termoplástico de alta resistencia y bajo coeficiente de rozamiento. Esta combinación resiste los aceites minerales, las grasas y los fluidos ignífugos HFA, HFB y HFC, y mantiene la estabilidad dimensional del conjunto frente a la presión y a las cargas laterales.
DATOS TÉCNICOS
ItemDescriptionApplicator type
A-340N4C-28 / DE-4CD
A-340N7C-28 / DE-4CD
A-605N4DE-5CD
A-605N7DE-5CD
A-605N9DE-5CD
A-606N4DE-6CD
A-606N7DE-6CD
A-606N9DE-6CD
A-607N4DE-7CD
A-607N7DE-7CD
A-607N9DE-7CD
A-608N4DE-8CD
A-608N7DE-8CD
A-608N9DE-8CD
A-609N4DE-9CD
A-609N7DE-9CD
A-609N9DE-9CD
A-610N4DE-10CD
A-610N7DE-10CD
A-610N9DE-10CD
A-719N4DE-1.9CD
A-719N7DE-1.9CD
A-719N9DE-1.9CD
A-723N4DE-2.3CD
A-723N7DE-2.3CD
A-723N9DE-2.3CD
Blade dimensions
The dimensions marked Ref are reference values taken on the blade and are intended to help you compare models, they are not inspection dimensions. As with the pliers, the diagram brings together every blade version in the range, so we recommend that you check each letter against the table row matching your part number.
Contacto OSN

Can we help you?

Our team will help you find the best solution and choose the optimal profile and material for your application.
Customer Area
Access for registered distributors and industrial suppliers.
E-shop
Direct purchase, with or without an account.