Applicator A

The A applicator is the standard model for manual installation of radial retaining rings on shafts. It is designed to work together with a dispenser, allowing the ring to be picked up and moved into the installation groove quickly, precisely and repeatably.

Its robust structure provides good force transmission during installation and helps keep the ring correctly guided until it is seated. It is suitable for frequent assembly operations, both in production and maintenance, when a strong, stable and direct-use tool is required.

VENTAJAS

MATERIALES

Disponible en NBR y POM. El anillo de estanqueidad se fabrica en NBR reforzado con tejido, que aumenta la resistencia mecánica y la capacidad de soportar la presión sin extruirse, y los anillos de guía y apoyo en POM, un termoplástico de alta resistencia y bajo coeficiente de rozamiento. Esta combinación resiste los aceites minerales, las grasas y los fluidos ignífugos HFA, HFB y HFC, y mantiene la estabilidad dimensional del conjunto frente a la presión y a las cargas laterales.

DATOS TÉCNICOS

Applicator No.	Ring type	Ring size	Blade width A	Blade length B	Tip length C	Eccentric D
A-010	E / SE / YE	E-4	.265	1.438	.375	.250
A-010	ME	ME-1	.265	1.438	.375	.375
A-020	E / SE / YE	SE-6	.265	1.438	.375	.375
A-030	E / SE / YE	YE-6	.500	1.438	.375	.375
A-040	E / SE / YE	E-6	.265	1.438	.375	.375
A-040	ME	ME-2	.265	1.438	.375	.375
A-050	E / SE / YE	SE-9	.500	1.438	.375	.375
A-050	E / SE / YE	E-12	.500	1.438	.375	.375
A-050	JE	JE-2.5	.500	1.438	.375	.375
A-050	ME	ME-3	.500	1.438	.375	.375
A-060	E / SE / YE	SE-11	.500	1.438	.375	.375
A-070	E / SE / YE	E-14	.500	1.438	.375	.375
A-070	JE	JE-3	.500	1.438	.375	.375
A-080	E / SE / YE	SE-14	.500	1.438	.375	.375
A-080	RE	RE-9	.500	1.438	.375	.375
A-080	C	C-15	.500	1.438	.375	.375
A-080	JE	JE-2	.500	1.438	.375	.375
A-080	DC	DC-4
A-090	E / SE / YE	YE-14	.500	1.438	.375	.375
A-090	C	C-18	.500	1.438	.375	.375
A-091	EI	EI-9	.438	2.188	.375	A-091C
A-100	E / SE / YE	E-15	.500	1.438	.375	.375
A-100	ME	ME-4	.500	1.438	.375	.375
A-110	E / SE / YE	SE-17	.500	1.438	.375	.375
A-112	EI	EI-12	.438	2.188	.375	A-112C
A-118	EI	EI-18	.625	2.188	.563	A-118C
A-120	E / SE / YE	E-18	.500	1.438	.375	.375
A-120	RE	RE-15	.500	1.438	.375	.375
A-120	ME	ME-5	.500	1.438	.375	.375
A-120	DC	DC-7
A-125	EI	EI-25	.750	2.188	.625	A-125C
A-130	E / SE / YE	SE-18	.500	1.438	.375	.375
A-130	RE	RE-18	.500	1.438	.375	.375
A-131	EI	EI-31	1.000	2.625	.750	A-131C
A-140	E / SE / YE	SE-21	.812	2.218	.593	.625
A-140	RE	RE-21	.812	2.218	.593	.625
A-140	ME	ME-6	.812	2.218	.593	.625
A-143	EI	EI-43	1.125	2.625	.938	A-143C
A-150	E / SE / YE	E-25	.812	2.218	.593	.625
A-150	ME	ME-7	.812	2.218	.593	.625
A-160	E / SE / YE	SE-31	.812	2.218	.593	.625
A-160	RE	RE-25	.812	2.218	.593	.625
A-170	E / SE / YE	E-37	.812	2.218	.593	.625
A-170	RE	RE-37	.812	2.218	.593	.625
A-170	ME	ME-10	.812	2.218	.593	.625
A-180	E / SE / YE	E-43	.812	2.218	.593	.625
A-180	ME	ME-11	.812	2.218	.593	.625
A-190	E / SE / YE	SE-43	.812	2.218	.593	.625
A-190	DC	DC-13
A-200	E / SE / YE	E-50	1.125	2.390	.765	.625
A-200	RE	RE-50	1.125	2.390	.765	.625
A-200	ME	ME-13	1.125	2.390	.765	.625
A-200	DC	DC-18
A-210	E / SE / YE	E-62	1.125	2.390	.766	.625
A-210	ME	ME-16	1.125	2.390	.765	.625
A-220	E / SE / YE	SE-74	1.562	2.625	.969	.625
A-230	E / SE / YE	E-75	1.562	2.625	.969	.625
A-240	E / SE / YE	E-87	1.562	2.625	.969	.625
A-240	ME	ME-22	1.125	2.625	.969	.625
A-250	E / SE / YE	SE-98	1.875	2.844	1.188	.625
A-260	E / SE / YE	SE-118	1.875	2.844	1.188	.625
A-270	RE	RE-43	1.125	2.390	.765	.625
A-280	RE	RE-56	1.125	2.390	.765	.625
A-280	C	C-75	1.125	2.390	.765	.625
A-280	DC	DC-19
A-290	E / SE / YE	SE-37	.812	2.218	.593	.625
A-290	C	C-50	.812	2.218	.593	.625
A-290	ME	ME-8	.812	2.218	.593	.625
A-290	DC	DC-12
A-300	C	C-12	.264	1.438	.375	.375
A-310	C	C-21	.500	1.438	.375	.375
A-310	DE	DE-3.2	.500	1.438	.375	.375
A-320	C	C-23	.500	1.438	.375	.375
A-320	DC	DC-6
A-330	C	C-25	.500	1.438	.375	.375
A-340	C	C-28	.500	1.438	.375	.375
A-340	JE	JE-4	.500	1.438	.375	.375
A-340	DE	DE-4	.500	1.438	.375	.375
A-350	C	C-31	.500	1.438	.375	.375
A-360	C	C-37	.812	2.218	.593	.625
A-370	C	C-40	.812	2.218	.593	.625
A-371	EI	EI-37	1.125	2.625	.813	A-371C
A-380	C	C-43	.812	2.218	.593	.625
A-390	C	C-56	.812	2.218	.593	.625
A-390	DC	DC-14
A-400	C	C-62	1.125	2.390	.765	.625
A-400	DC	DC-16
A-410	C	C-68	1.125	2.390	.765	.625
A-420	C	C-81	1.125	2.390	.765	.625
A-430	C	C-87	1.125	2.390	.765	.625
A-440	C	C-93	1.562	2.625	.969	.625
A-450	C	C-100	1.562	2.625	.969	.625
A-460	C	C-112	1.562	2.625	.969	.625
A-470	C	C-125	1.562	2.625	.969	.625
A-480	C	C-137	1.562	1.875	1.188	.625
A-490	C	C-150	1.562	1.875	1.188	.625
A-491	C	C-162	2.250	3.344	N/A	N/A
A-492	C	C-175	2.250	3.344	N/A	N/A
A-500	RE	RE-31	.812	2.218	.593	.625
A-510	E / SE / YE	E-9	.500	1.438	.375	.375
A-520	RE	RE-12	.500	1.438	.375	.375
A-545	DC	DC-3
A-550	BE / BSE	BSE-11	.500	1.375
A-551	BE / BSE	BE-12	.500	1.375
A-552	BE / BSE	BE-14	.500	1.375
A-553	BE / BSE	BSE-14	.500	1.375
A-554	BE / BSE	BE-15	.500	1.375
A-555	BE / BSE	BSE-17	.500	1.375
A-556	BE / BSE	BE-18	.500	1.375
A-557	BE / BSE	BSE-18	.500	1.375
A-558	BE / BSE	BSE-21	.812	2.156
A-559	BE / BSE	BE-25	.812	2.156
A-560	BE / BSE	BSE-31	.812	2.156
A-561	BE / BSE	BE-37	.812	2.156
A-562	BE / BSE	BE-43	.812	2.156
A-563	BE / BSE	BSE-43	.812	2.156
A-564	BE / BSE	BE-50	1.125	2.250
A-565	BE / BSE	BE-62	1.125	2.250
A-566	BE / BSE	BSE-74	1.562	2.469
A-567	BE / BSE	BE-75	1.562	2.469
A-568	BE / BSE	BE-87	1.562	2.469
A-569	BE / BSE	BSE-98	1.875	2.812
A-570	DC	DC-8
A-571	DC	DC-9
A-572	DC	DC-10
A-573	DC	DC-11
A-577	DC	DC-15
A-579	DC	DC-17
A-582	DC	DC-20
A-583	DC	DC-22
A-584	DC	DC-23
A-585	DC	DC-24
A-586	DC	DC-25
A-587	DC	DC-26
A-588	DC	DC-28
A-589	DC	DC-30
A-590	DC	DC-32
A-591	DC	DC-35
A-592	DC	DC-36
A-593	DC	DC-38
A-594	DC	DC-40
A-595	DC	DC-42
A-596	DC	DC-45
A-597	DC	DC-48
A-598	DC	DC-50
A-599	DC	DC-52
A-600	DC	DC-55
A-605	JE	JE-5	.812	2.218	.593	.625
A-605	DE	DE-5	.812	2.218	.593	.625
A-606	JE	JE-6	.812	2.218	.593	.625
A-606	DE	DE-6	.812	2.218	.593	.625
A-607	JE	JE-7	.812	2.218	.593	.625
A-607	DE	DE-7	.812	2.218	.593	.625
A-608	JE	JE-8	.812	2.218	.593	.625
A-608	DE	DE-8	.812	2.218	.593	.625
A-608	ME	ME-9	.812	2.218	.593	.625
A-609	DE	DE-9	1.125	2.390	.765	.625
A-609	ME	ME-12	1.125	2.390	.765	.625
A-610	DE	DE-10	1.125	2.390	.765	.625
A-612	JE	JE-12	1.562	2.625	.969	.625
A-612	DE	DE-12	1.562	2.625	.969	.625
A-612	ME	ME-15	1.125	2.390	.969	.625
A-615	DE	DE-15	1.562	2.625	.969	.625
A-619	DE	DE-19	1.875	2.844	1.188	.625
A-708	DE	DE-0.8	.265	1.438	.375	.375
A-712	DE	DE-1.2	.265	1.438	.375	.375
A-715	DE	DE-1.5	.265	1.438	.375	.375
A-719	DE	DE-1.9	.265	1.438	.375	.375
A-723	DE	DE-2.3	.500	1.438	.375	.375
A-723	DC	DC-5
A-810	PO / POL	PO-100	1.875
A-815	PO / POL	PO-15	.500	1.438	.375	.625
A-818	PO / POL	PO-18	.812	2.218	.593	.625
A-825	PO / POL	PO-25	.812	2.218	.593	.625
A-831	PO / POL	PO-31	.812	2.218	.593	.625
A-837	PO / POL	PO-37	1.125	2.390	.765	.625
A-843	PO / POL	PO-43	1.125	2.390	.765	.625
A-850	PO / POL	PO-50	1.125	2.390	.765	.625
A-862	PO / POL	PO-62	1.125
A-875	PO / POL	PO-75	1.562
A-910	PO / POL	POL-100	1.875
A-915	PO / POL	POL-15	.500	1.438	.375	.625
A-918	PO / POL	POL-18	.812	2.218	.593	.625
A-925	PO / POL	POL-25	.812	2.218	.593	.625
A-931	PO / POL	POL-31	.812	2.218	.593	.625
A-937	PO / POL	POL-37	1.125	2.390	.765	.625
A-943	PO / POL	POL-43	1.125	2.390	.765	.625
A-950	PO / POL	POL-50	1.125	2.390	.765	.625
A-962	PO / POL	POL-62	1.125
A-975	PO / POL	POL-75	1.562

Can we help you?

Our team will help you find the best solution and choose the optimal profile and material for your application.