Pliers RPS and RPL

RPS and RPL pliers correspond to the standard inch-size range. Within this classification, they are used for internal and external retaining rings in imperial dimensions, selecting the appropriate reference according to the ring type and required size range.
These pliers are manufactured from treated high-carbon steel and include stops and return springs to facilitate ring installation and removal. For external rings, the stops help prevent excessive opening; for internal rings, they help position the tips accurately in the ring lugs or holes.
PliersRing sizeTypes RPS and RPL pliers45° tip pliers90° tip pliersWeight (lbs.)Tip diameter (inches)Tip length A (inches)Clearance B (inches)Clearance C (inches)Standard tip length (inches)Width (inches)
RPL-10062-102HO, BHO, VHORPL-104RPL-109.15.0479/327/81-7/85-1/21-7/8
RPL-100106-137HOIRPL-104RPL-109.15.0479/327/81-7/85-1/21-7/8
RPL-20068-87SH, BSH, VSHRPL-204RPL-209.15.0479/32125-1/22-1/2
RPL-20081-100SHIRPL-204RPL-209.15.0479/32125-1/22-1/2
RPL-20050-66SHRRPL-204RPL-209.15.0479/32125-1/22-1/2
RPS-10025-31HO, BHO, VHORPS-104RPS-109.15.0259/327/81-7/85-1/21-7/8
RPS-10062HOIRPS-104RPS-109.15.0259/327/81-7/85-1/21-7/8
Tip dimensions
The letters on the drawing correspond to the columns of the dimensions table, so you can see on the diagram where each dimension is taken. The drawing is common to the whole range, which is why all three tip types are shown, straight, 45° bent and 90° bent, although each part number only features the one stated in its designation.
Contacto OSN

Can we help you?

Our team will help you find the best solution and choose the optimal profile and material for your application.
Customer Area
Access for registered distributors and industrial suppliers.
E-shop
Direct purchase, with or without an account.