RPI pliers

RPI pliers correspond to the standard range for metric internal retaining rings. They are designed for installing and removing rings housed in bores or internal grooves, where the tool must act on the ring from the inside.

Their design allows the ring to be compressed in a controlled way to facilitate insertion into or removal from the housing. The correct reference should be selected according to the metric ring series and the diameter range indicated in the catalogue.
PliersRing size (mm)Types RPI pliers45° tip pliers90° tip pliersWeight (kg)Tip diameter (mm)Tip length A (mm)Clearance B (mm)Clearance C (mm)Total straight tip length (mm)Max. handle width (mm)
RPI-08 / 9DHO (DIN 472), DHT (DIN 984)RPI-045RPI-0900.070.98194814045
RPI-110 / 17DHO (DIN 472), DHT (DIN 984)RPI-145RPI-1900.071.38194814045
RPI-218 / 30DHO (DIN 472), DHT (DIN 984)RPI-245RPI-2900.11.810255516560
RPI-331 / 83DHO (DIN 472), DHT (DIN 984)RPI-345RPI-3900.232.314307023065
RPI-485 / 100DHO (DIN 472), DHT (DIN 984)RPI-445RPI-4900.423.220457030055
Tip dimensions
The letters on the drawing correspond to the columns of the dimensions table, so you can see on the diagram where each dimension is taken. The drawing is common to the whole range, which is why all three tip types are shown, straight, 45° bent and 90° bent, although each part number only features the one stated in its designation.
Contacto OSN

Can we help you?

Our team will help you find the best solution and choose the optimal profile and material for your application.
Customer Area
Access for registered distributors and industrial suppliers.
E-shop
Direct purchase, with or without an account.