RP Pliers

RP pliers correspond to convertible retaining ring pliers, designed to change quickly between internal and external use. This two-in-one configuration is practical and cost-effective when different types of rings need to be handled with a single tool.
The conversion is carried out by moving the screw to the other position and tightening it again, allowing the pliers to be adapted to the type of ring to be installed or removed. They are suitable for maintenance, general assembly and applications where versatility is required with a reduced number of tools.
PliersRing sizeTypes RP pliers45° tip pliers90° tip pliersWeight (lbs)Tip diameter (inches)Tip length A (inches)Clearance B (inches)Clearance C (inches)Standard tip length (inches)Width (inches)
RP-1212SH, BSH, VSHRP-2124RP-2129.05.0237/321/21-1/85-5/161-1/2
RP-1515SH, BSH, VSHRP-2154RP-2159.05.0237/321/21-1/85-5/171-1/2
RP-1818-23SH, BSH, VSHRP-2184RP-2189.05.0237/321/21-1/85-5/181-1/2
RP-10037-56HO, BHO, VHORP-104RP-109.15.0389/327/81-7/85-1/21-7/8
RP-10075-100HOIRP-104RP-109.15.0389/327/81-7/85-1/21-7/8
RP-12037-43HO, BHO, VHORP-124RP-129.19.0389/321-3/161-5/85-5/81-3/4
RP-12025-60SH, BSH, VSHRP-124RP-129.19.0389/321-3/81-5/85-5/82-9/16
RP-12075-100HOIRP-124RP-129.19.0389/321-3/161-5/85-5/81-3/4
RP-12012-25SHFRP-124RP-129.19.0389/321-3/81-5/85-5/82-9/16
RP-12050-78SHIRP-124RP-129.19.0389/321-3/81-5/85-5/82-9/16
Tip dimensions
The letters on the drawing correspond to the columns of the dimensions table, so you can see on the diagram where each dimension is taken. The drawing is common to the whole range, which is why all three tip types are shown, straight, 45° bent and 90° bent, although each part number only features the one stated in its designation.
Contacto OSN

Can we help you?

Our team will help you find the best solution and choose the optimal profile and material for your application.
Customer Area
Access for registered distributors and industrial suppliers.
E-shop
Direct purchase, with or without an account.